Project Overview
Application context and heating arrangement.
Heating zone equipment arranged beside a multilayer press line for panel and sheet production.
ApplicationMultilayer press heating
Heating EquipmentElectric heating zone system
Application Requirement
A multilayer press line for panel or sheet production needs heat distributed across several plates or zones rather than one single heating point.
Recommended Configuration
Electric heating zone equipment was arranged beside the press line so the heating circuits can be reviewed by zone, platen area and production rhythm.
Project Details
Press structureConfirm layer count, platen size, heating-zone layout and available installation space.
Temperature targetConfirm set temperature, heat-up time, acceptable uniformity and material sensitivity.
Control designConfirm independent zone control, sensor placement, over-temperature protection and cabinet layout.
Site utilitiesConfirm incoming power capacity, cable routing, grounding and operator-access requirements.
Observed Installation
The site photo shows a distributed heating-zone arrangement installed beside a large multilayer press, with the heating equipment kept accessible for operation and maintenance.
Documentation Scope for This Reference
- The site image supports the visible equipment layout and installation context described on this page.
- The listed project details are a selection checklist; they are not presented as measured values for the photographed installation.
- Temperature stability, capacity, energy use, service life and production improvement require order-specific test or commissioning records.
- A similar process name does not establish suitability until heat duty, scale, utilities, controls and acceptance criteria are compared.
Simplified Heating Flow
Site utilityYigao heating unitHeat-transfer circuitMultilayer press heatingTemperature control
Information Required for Selection
- Production line dimensions, drawings and installation photos.
- Material, process temperature, heating medium, airflow or circulation data.
- Power, fuel or voltage condition, control-zone count and safety interlock requirements.
- Destination country, required standards, acceptance criteria and inspection documents.